ZHKY8050BS Slip ring type rotarty torque sensor  description

 

Model: ZHKY8050BS

Capacity: 0~200/300/500 Nm

Precision: ±0.1;  ±0.3;  ±0.5%F.S

Torque Output : 1.0~1.5 mV/V (4-20mA, 0-5/ 0-10Vdc)

RPM: 4000RPM at most

Speed measure: Support

Features:

 

1, Fitted with metallic strain gauges in a Wheatstone bridge circuit, we can get power and signal output through slip ring inside.

2, Suitable for low and medium torque capacity, can measure both clockwise and anti-clockwise torque.

3, Shaft to shaft connection, speed measure support, easy installation.

4, Maximum speed allowed is 4000RPM. 


 

Technical specification:

Torque Range

0~200/300/500

Nm

Sensitivity Output

1.0~2.0

mV/V

Accuracy

±0.1; ±0.3; or (±0.03%, ±0.05%)

%F.S

Linearity

±0.1; ±0.3;

%F.S

Hysteresis

±0.1; ±0.3;

%F.S

Repeatability

±0.1; ±0.3;

%F.S

Working temperature

-10~+60

Temperature compensation range

Room temp.~+60

Temperature effect on Zero

±0.1

%F.S/10 ℃

Excitation voltage

12

VDC

Insulation resistance

2000

MΩ/100VDC

Input resistance

700±10/350±10

Ω

Output resistance

700±5/350±5

Ω

Zero output

0~±1

%F.S

Safety overload

120

%F.S

cable length

3

m

Speed

10 gears / circle

RPM

Cable connection:

Red: Exc+  Black: Exc -   Green: Signal +   White: Signal- 

 

ZHKY8050BS

1, Application Area

ZHKY8050 series dynamic torque sensor is an accurate measuring device for torque and mechanical power consumption. Mainly applied in

 1.1 Electromotor, Engine motor, internal-combustion engine and other rotating equipment.

 1.2 Fan, water pump, torque wrench

 1.3 Train, auto mobile, tractor, airplane, ship, mining machine

 1.4 Water recycling system

 1.5 Viscometer

 1.6 Process industry

 

2, Installation requirement

2.1 Suitable for both vertical and horizontal installation

  2.2 All loading equipment, torque sensor, power equipment should be installed on a solid platform to avoid excessive vibration. Otherwise, it may cause unstable reading, reduce accuracy or even damage torque sensor.

  2.3 Use elastic pin coupling

  2.4 Flexible fixing is recommended for fixing the middle part of torque sensor. Do not apply rigid fixing.

  2.5 Concentricity tolerance of loading equipment, torque sensor, power equipment should be less than Φ0.05mm.

 

3, Installation steps

 3.1 Confirm distance between power equipment and loading equipment based on shaft connection type and torque sensor length. Adjust the gap between the axil line (of power & loading equipment) and datum plane, make sure the coaxiality between them is less thanΦ0.03mm, then fix power & loading equipment on datum plane.

 

 3.2 Install coupling on each shaft

 3.3 Adjustment the distance between torque sensor and datum plane, make sure the coaxiality between their axil line and the axil line of power & loading equipment is less thanΦ0.03mm.  Then fix torque sensor on datum plane.

 3.4 Fix the coupling, installation finished.

 

4, Normal installation ways

 4.1 When speed is less than 300RPM, no frequent clockwise and anti-clockwise rotating, some flexible object can be used to connect with torque sensor and prevent it from rotating.

ZHKY8050BS

 4.2 When speed is higher than 300RPM, with frequent clockwise and anti-clockwise rotating, fixing plate on both front and back of torque sensor is necessary. Add 2-3 mm silicon rubber in the middle of torque sensor and fixing board with 15%-20% compression amount to prevent it from becoming rigid connection.

ZHKY8050BS

Optional Accessories

 ZHKY8050BS

Torque meter

Accessories: installation tools

Torque value display only

Cable; Torque sensor cable

Optional :Support RS232 for computer connecting. 

 ZHKY8050BS

Speed meter

Accessories: installation tools

Speed value display only

Cable; Torque sensor cable

Optional : Support RS232 for computer connecting. 

 ZHKY8050BS

Coupling

Aluminum for small capacity

Alloy steel for medium capacity

Stainless steel for big capacity

 ZHKY8050BS

Transmitter:

For converting mv/v output to analogue output, like 0-5V / 0-10V/ 4-20mA

 ZHKY8050BS

Software

1, Support data display, storage, download.

2, Able to display torque, speed and power consumption data if the meter connected to it support those functions.

 

 

ENQUIRY

*Company Name :
*Phone Number:
*E-MAIL:
*Model Enquired:
*Detailed Enquiry :